TOA DP-SP3
āļĢāļŦāļąāļŠāļŠāļīāļāļāđāļē : DP-SP3
āļĢāļēāļāļē |
70,740.00 āļŋ |
āļāļģāļāļ§āļāļāļĩāđāļāļ°āļāļ·āđāļ | |
āļĢāļēāļāļēāļĢāļ§āļĄ | 70,740.00 āļŋ |
āļŠāļīāļāļāđāļēāđāļĄāđāđāļāļĩāļĒāļāļāļ
āļŠāļīāļāļāđāļēāļŦāļĄāļ
āļĢāļēāļĒāļĨāļ°āđāļāļĩāļĒāļāļĒāđāļ : āđāļāļĢāļ·āđāļāļāļāļĢāļ°āļĄāļ§āļĨāļāļĨāđāļŠāļĩāļĒāļ DIGITAL SPEAKER PROCESSOR
āļĢāļēāļĒāļĨāļ°āđāļāļĩāļĒāļāļāļąāđāļāļŦāļĄāļ : TOA DP-SP3 āđāļāļĢāļ·āđāļāļāļāļĢāļ°āļĄāļ§āļĨāļāļĨāđāļŠāļĩāļĒāļ DIGITAL SPEAKER PROCESSOR
The DP-SP3 is a 1U rack mountable Digital speaker processor having 2 inputs and 6 outputs. It features digital signal processing functions such as Equalizer, Crossover, Matrix, Compressor, and Delay. Other functions include input PAD, analog output attenuator, output MUTE, EQ characteristic library for TOA speakers, and contact input terminals. When connected to a LAN, settings and operations of the DP-SP3 can be performed on a PC with the supplied DP-SP3 PC Software installed. It can be mounted in an EIA component rack (1U size).
ïŧŋ
Specification
* 0 dB = 0.775 V
Power Source220-240 V AC, 50/60 HzPower Consumption25 WFrequency Response20 Hz - 20 kHz, Âą1 dBSampling Frequency96 kHzDynamic Range110 dB or moreDistortion0.03 % or less, 1 kHz, +4 dB* input/output, 20 Hz - 20 kHz BPFCrosstalk-80 dB or less, 1 kHzInput2 channels, +4 dB* (max. +24 dB*), 10 kÎĐ, electronically-balanced,
removable terminal block (3P)Output6 channels, +4 dB* (max. +24 dB*), applicable load 600 ÎĐ or more,
electronically-balanced, removable terminal block (3P)AD Converter24 bitsDA Converter24 bitsPreset Memory16
Signal Processing Section
Equalizer/FilterParametric equalizer: 20 Hz - 20 kHz, Âą15 dB, Q: 0.267 - 69.249
Filter:
High-pass filter: 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct
Low-pass filter: 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct
Notch filter: 20 Hz - 20 kHz, Q: 8.651 - 69.249
All-pass filter: 20 Hz - 20 kHz, Q: 0.267 - 69.249
High-shelving filter: 5 - 20 kHz, Âą15 dB
Low-shelving filter: 20 - 500 Hz, Âą15 dB
Horn equalizer: 20 kHz, 0 - 18 dB in 0.5 dB stepsCrossover2 ways, 3 ways, 4 ways
Crossover filter: 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct,
-15 to +12 dB, polarity switchable
Delay: 0 - 170.656 ms in 0.01 ms stepsCompressorThreshold: -20 to +20 dB* in 1 dB steps
Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 7:1, 8:1, 10:1, 12:1, 20:1, infinity:1
Attack time: 0.2 ms - 5 s
Release time: 10 ms - 5 sDelayDelay time: 0 - 682.656 ms in 0.01 ms stepsMatrix2 Ã 6Crosspoint Gainminus infinity to 0 dB in 1 dB stepsFunctionInput PAD (-14 dB) control, analog output attenuator
(- to 0 dB in 1 dB steps) control, EQ characteristic library for TOA speakers,
input/output level indicator (4-point LED indicator), output MUTE switch Ã6
Control
Contact input4 channels, open voltage: 5 V DC, short-circuit current: 5 mA,
removable terminal block (5 P),
control function: preset memory selection, volume control, and muteNetworkNetwork I/F: 1 channel of 10BASE-T/100BASE-TX (auto-negotiation)
RJ45 connector, connection via switching hub
Network protocol: TCP/IP
Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN
(Cat. 5-STP or better)
Maximum cable length: 100 m (109.36 yd) (between DP-SP3 and switching hub)
Operating Temperature0 â to +40 â (32 ãF to 104 ãF)Operating Humidity90 %RH (no condensation)FinishPanel: Aluminum, hairline, black, Case: Surface-treated steel plateDimensions482 (W) Ã 44 (H) Ã 289 (D) mm (18.98" Ã 1.73" Ã 11.38")Weight3.1 kg (6.83 lb)AccessoriesPower supply cord ((2 m (6.56 ft)) Ã1, removable terminal plug (3P) Ã8,
removable terminal plug (5P) Ã1, rack mounting screw Ã4,
CD-ROM (containing setup software) Ã1