QSC SC-28

รหัสสินค้า : SC-28

ราคา

63,700.00 ฿

จำนวนที่จะซื้อ
ราคารวม 63,700.00 ฿

สินค้าไม่เพียงพอ

สินค้าหมด

รายละเอียดย่อ : เครื่องประมวลผลสัญญาณดิจิตอล Digital Signal Processors


รายละเอียดทั้งหมด : QSC SC-28 เครื่องประมวลผลสัญญาณดิจิตอล Digital Signal Processors


SC-28 System Controller


The SC28 is a 2 input, 8 output digital system controller containing pre-programmed tunings for QSC loudspeaker systems (see list of supported loudspeakers at right). In addition to the preset tunings, the SC28 also offers user-adjustable equalization and delay.

Audio inputs and outputs are via balanced, line-level, analog XLR connectors. Four outputs for each of the two inputs are provided for use with 2 or 3-way systems plus subwoofers. Simple to operate yet uncompromised in audio quality, the SC28 uses 48 kHz, 24-bit A/D and D/A conversion with 32-bit, floating point DSP for wide dynamic range and low distortion. Advanced DSP is capable of implementing tunings that incorporate IIR (Infinite Impulse Response) as well as FIR (Finite Impulse Response) filters.


QSC system engineers have employed the power of the SC28's FIR (finite impulse response) filters to implement "Intrinsic Correction™" of the loudspeaker. The goal of Intrinsic Correction™ is to provide a drive signal to the amplifiers and loudspeakers that will result in the most accurate acoustical magnitude, frequency and phase domain performance possible. When properly implemented, Intrinsic Correction™can compensate for many causal phenomena such as the effects of waveguide acoustical impedance and loudspeaker cone resonance. The result is a loudspeaker system with excellent power response and extremely natural, uncolored sound across its frequency band and coverage area. An array of loudspeakers with Intrinsic Correction™ tunings will also be very responsive to the use of equalization to compensate for array configuration, acoustical conditions or user preferences. 


Selection of tunings is accomplished by simply scrolling through a list of QSC loudspeakers and selecting the configuration on the LCD panel. A similar process is used to select the QSC amplifiers being used and to configure amplifier input sensitivity for proper dynamic protection gain structure. Settings for new QSC products may be loaded into the SC28 via a rear-mounted USB port.


Once the processor settings have been matched to the system, the user or installer can take advantage of an integral, 6 band parametric equalizer, high and low shelving filters and signal delay to optimize for acoustic, environmental or aesthetic considerations. Password protection is included to prevent unauthorized tampering. The SC28 is easy to use and delivers superb audio performance at a very affordable price.


Features


  • Two (2) XLR line-level inputs
  • Eight (8) XLR line-level outputs
  • Front panel meters for all inputs and outputs
  • Universal AC power input
  • Rear-panel USB port for quick and easy loading of new loudspeaker tunings

Front Panel Control:

  • Quickly set up your loudspeaker system to perform and sound as designed by QSC engineers

QSC Loudspeaker Selection:

  • Select the QSC loudspeaker and configuration (2-way, 3-way, etc.) and the SC28 instantly reconfigures itself for optimal audio reproduction

QSC Amplifier Selection:

  • Select the QSC amplifier being used to calibrate the processor to the amplifier for proper balance and loudspeaker protection

User-Adjustable Input EQ:

  • Six (6) parametric filters with adjustable frequency, gain and bandwidth
  • High and low shelf filters with adjustablefrequency, gain and slope

User-Adjustable Delays:

  • Sub delay adjustable from 0 to 50 ms
  • Array delay adjustable from 0 to 20 ms

Subwoofer Management:

  • Select stereo or mono-summed subwoofer
  • Adjustable subwoofer gain
  • System is optimized for operation with or without subwoofer

Loudspeaker Protection:

  • Optimized thermal and excursion protection for each transducer
  • User-bypassable for output clip-limiting only

Channel Linking:

  • Select linked or independent control of stereo channel settings


(AES-17, -60 dB Method, all sensitivities) 

> 104dB

> 107dBInput Impedance

  Unbalanced (nominal)

  Balanced (nominal)

69k ohms

11k ohmsCommon Mode Rejection

  20 Hz - 20 kHz (min)

  20 Hz - 20 kHz (typ)

> 75 dB

> 80 dBInput SensitivitiesVrms: 1.5V, 3V, 9V, 18V 

dBU: 5.7, 11.8, 21.3, 27.3

dBV: 3.5, 9.5, 19.1, 25.1Distortion 

  +4 dBu

  2 dB below clip (max)

(AES-17, 20 Hz - 20 kHz, all sensitivities)

< 0.006 THD+N

< 0.006 THD+NCrosstalk (20 Hz – 20 kHz)

  Inter-channel (max)

> 75 dBFrequency Response+/- 0.1dB from target responseAudio Converters24 bit, 48k HzMuteInfinite AttenuationThroughput Delay1.4125 milliseconds (A/D – DSP - D/A)Program Inputs

  Connector Type

  Type

  Grounding

  Pinout2

XLR female, locking

Electronically balanced

All shield terminals connected to chassis

1: (GND) 2: (+), 3: (-)Program Outputs

  Connector Type

  Type

  Grounding

  Pinout8

XLR male

Electronically balanced

All shield terminals connected to chassis

1: (GND) 2: (+), 3: (-)ControlsRotary encoder knob with push-to-select functionIndicators

  Power

  LCD Data Display

  Input/Output Meters

Blue, front panel

2 lines 16 character, backlit, front panel

Green, Yellow, Red, front panelUSB PortUSB type “B”AC Power Requirements100-240 VAC, 50-60 Hz, no user adjustment requiredAC Power ConnectionIEC-type inletAC Power Cord2 meters long, #18AWGDimensions1.73"H x 18.94"W x 6.67"D 

(44 mm x 481 mm x 169 mm)

1 Rack UnitWeight4.5 lbs / 2 kg


Visitors: 56,849